Features:
Test force: 62.5kgf-3000kgf.
Measuring Brinell Hardness Tester
X.Y.Z three-axis movement
Start, load, maintain, unload, and measure are all fully automated
Personalization
Function
●Parts are loaded manually or by crane
●Parts automatically run to the inspection station
●Automatic clamping
●Automatic milling
●Automatic hardness detection
●Hardness value is qualified, automatic typing
●Automatic rotation angle for other point detection
●The parts automatically run to the unloading end
and are unloaded manually or by crane
●The hardness value is unqualified, the equipment
alarms, shuts down, and manual intervention is
required for cutting.
●Test data is stored in the local control system
Equipment performance parameters:
●Power supply: 380/220V±10%, 50Hz±0,5%.
●Power: about 15kW, three lines and five lines
●Compressed air pressure: 0.4MPa~0.8Mpa;
●Air consumption: ≤300L/min.
●Equipment installation space: length × width × height ≤ 6 × 4 × ≤ 4 (m)
●The equipment meets the standard GB/T231.1 “Metal Materials Brinell Hardness Test Method”
●Usage environment: indoor use at 10~40℃
●The equipment is configured with automatic cycle mode, manual mode and empty cycle mode, which can
be switched freely.
●The equipment control interface is designed in English, which can intuitively reflect the operating status of
the equipment and the current detected hardness value.
●The device human-machine interface has a three-level permission function. When logging in to each
account, the corresponding operation permissions will be assigned according to the account level.
●The device human-machine interface will allow for simple configuration by personnel with engineer
authority. For example, through the human-machine interface, all actions of the equipment can be
executed in a single step, detection data, alarm information, etc. can be displayed in real time, and upper
and lower limit hardness parameters and displacement parameters can be modified.
