金属切断機の設置と日常のメンテナンス
![](https://timetech-ndt.com/wp-content/uploads/2024/01/SQ-60-1024x716.jpg)
- 金属切断機の設置
- 金属組織切断機を安定した作業台の上に平らに置きます。設置するときは、排水を容易にするために、前部が後部よりわずかに高くなるようにしてください。
- 給水管と排水管を取り付けます。
- プラグをコンセントに差し込み、電源電圧がモーターの規定電圧と一致しているか、接地が安全・確実に行われているかを確認してください。モーターを始動した後、モーターシャフトは時計回りに回転する必要があります(つまり、切断火花は下向きになります)。ステアリングが従わない場合は、直ちにステアリングを修正してください。
- 金属切断機のメンテナンス
- クーラントなし、またはクーラントが不足した状態での切削は推奨できません。
- モーターのメンテナンスも必要です。
- It is not advisable to cut without coolant or with insufficient coolant.
- This machine should be cleaned and maintained every day, and lubricating oil should be injected into each rotating position before operation.
- The accumulated chips and impurities in the body should be removed regularly to ensure smooth drainage.
- The motor should be maintained accordingly.
![](https://timetech-ndt.com/wp-content/uploads/2024/01/SQ-60-1024x716.jpg)