（３）測定値の判断基準：国際規格ＩＳＯ２３７２を参照。速度:600~1200r/min、振動測定範囲:10~1000Hz。通常、機器が正常に動作している場合、検出速度値は監視目的で4.5～11.2mm/s（75kW以上のユニット）の範囲にあり、7.1mm/sを超える場合は、メジャーな装置の配置を検討する必要があります。修理。この値を決定するには、装置のモーター容量を考慮することに加えて、強力な作業継続性、高い安全性と信頼性などの側面も考慮する必要があります。 つまり、振動計を他の試験装置と組み合わせて使用 すると、装置の稼働状況の分析に有益です。たとえば、振動計をオイル品質分析装置、モーター故障検出装置、調整装置と組み合わせて使用 すると、装置の動作をより正確に判断できます。 (2) Measurement cycle: When the equipment is just overhauled or close to overhaul, it needs to be tested once every two weeks; during normal operation, it should be tested once a month; if there is a significant change between the measured value and the last measured value, the test density should be strengthened, In order to prevent sudden accidents and cause downtime. (3) Judgment basis for measured values: refer to the international standard ISO2372. Speed: 600~1200r/min, vibration measurement range: 10~1000Hz. Usually, when the equipment is in normal operation, the detection speed value is in the range of 4.5-11.2mm/s (units above 75kW) for monitoring purposes, and if it exceeds 7.1mm/s, it is necessary to consider arranging major repairs. In addition to considering the motor capacity of the equipment, the determination of this value should also consider aspects such as strong work continuity, high safety and reliability. In short, the use of the vibration meter in conjunction with other testing instruments is beneficial to the analysis of the operating status of the equipment. For example, the vibration meter can be used in conjunction with oil quality analyzers, motor fault detectors, and alignment instruments to more accurately judge the operation of the equipment.
