Installation and daily maintenance of metallographic cutting machines.

Installation and daily maintenance of metallographic cutting machines.

1. Installation of metallographic cutting machine
2. Place the metallographic cutting machine flat on a stable workbench. When installing, the front should be slightly higher than the back to facilitate drainage.
3. Install the water inlet pipe and drainage pipe.
4. Lead the drain pipe to the sewer, and note that the drainage point should be lower than the drain outlet of the machine body.
5. Insert the plug into the power socket, and check whether the power supply voltage is consistent with the specified voltage of the motor, and whether the grounding is safe and reliable. After starting the motor, the motor shaft should rotate clockwise (that is, the cutting sparks are downward). If the steering does not comply, immediately Correct steering.
6. Maintenance of metallographic cutting machine
7. It is strictly prohibited to use cracked or damaged grinding wheels for cutting.
8. It is not advisable to cut without coolant or with insufficient coolant.
9. This machine should be cleaned and maintained every day, and lubricating oil should be injected into each rotating position before operation.
10. The accumulated chips and impurities in the body should be removed regularly to ensure smooth drainage.
11. The motor should be maintained accordingly.