TIME®5301 dynamic rebound Hardness Tester is well suited for hardness testing on large hard metal parts. It can save 48~350 groups of data. The RS232 connector meets more needs like storage and data analysis. It is the most cost-effective solution for normal hardness measurement.
TIME®5301 Hardness Tester adopts Leeb dynamic rebound method. It is well suited for hardness testing on large hard metal parts. It can store 48~350 groups of data. The RS232 connector meets more needs like storage and data analysis. It is the most cost-effective solution for normal hardness measurement.
Features
● Simple menu, easy and convenient to use.
● Conversion of common hardness scales (HL, HV, HB, HRC, HRB, HRA and HS) & conversion to tensile strength.
● 7 types of optional impact devices with auto recognition. Standard impact device D included.
● Matrix LCD display with backlight showing all the important values and information.
● Memory of 48-350 groups of data.
● Upper /Lower limits pre-setting and sound alarm.
● RS232 connector meets more needs like storage and further analysis.
● Indication for charge and easy change for rechargeable battery.
● Printer included and test values can be printed directly.
| Measuring range | (170-960)HLD (17.9-69.5)HRC |
| Hardness scale | HL, HB, HRA, HRB, HRC, HV, HS |
| Measuring direction | 360° |
| Tolerance | ±6HLD(when HLD=760±30) |
| Repeatability | 6HLD(when HLD=760±30) |
| Diameter for printer paper | 40mm |
| Width for printer paper | 44.5±0.5mm |
| Power | 12V/600mA |
| Charging time | 2-3.5 hour |
| Humidity | ≤90% |
| Operating temperature | 0℃~40℃ |
| Dimensions (mm) | 234×88×46 |
| Weight (g) | 600 |
| Standard Delivery | Optional Accessory | |
| Main unit | 1 | Special impact devices |
| Impact device type D | 1 | Support rings |
| Test block HLD | 1 | |
| Small support ring | 1 | |
| Cleaning brush | 1 | |
| Charger | 1 | |
| Printing paper | 1 | |
| TIME certificate | 1 | |
| Warranty card | 1 | |
| Instruction manual | 1 |
