TIME5631 has a large screen display, voice broadcast, and wireless Bluetooth connection.
TIME5631 is connected. After powering on, refresh the connection interface and then connect.
The front section of the probe can be unscrewed, and the measuring rod structure can measure simple and narrow parts.
The 10N probe ultrasonic hardness tester can be portable and quickly solve such problems;
Such as: 1) Chrome plating layer, quenching layer, nitriding layer, oxidation layer, and hardening layer of special processes and materials.
2) Pay attention to the thickness of the hardened layer. If it is particularly thin, use a smaller kilogram force to measure (such as 5N, 3N, 1N electric probe).
The ultrasonic hardness tester has a very small indentation mark, which is close to non-destructive measurement; direct indentation method measurement, indenter structure: diamond Vickers indenter.
Finished product inspection, does not damage the appearance, and is close to non-destructive measurement.
What is the use of ultrasonic hardness tester purchase: process inspection, finished product inspection, incoming material inspection, etc.
One of the test requirements of ultrasonic hardness tester: surface finish requirements. Reduce and avoid oil pollution.
The test is fast and efficient, which improves the detection efficiency for enterprises.
